The
TOPAS PMW series are well-established velocity flowmeters
based on the multijet measuring principle.
The
measuring principle is insensitive to flow turbulences.
SAPHIR bearings each side of the impeller wheel ensure
the highest possible
accuracy throughout the entire operating life of
the meter.
Your
benefits…
The
uniform flow of the impeller wheel ensures that even
the smallest flowrates can be detected.
Accurate
flow measurement significantly increases the value
of the system over its entire operating life.
The roller
counter can be rotated in any position required for reading
off values easily.
Type approval as hot water meters conforming to Directive 2004/22/EC - OIML R49. Optional: Declaration of type approval
Designation PN 16, 90 °C
PMW
PMW
PMW
PMW
PMW
PMW
DN, mm
15
20
25
32
40
50
Permanent flow rate Q3, m3/h
2.5
4
6.3
10
16
25
Standard
94190
94191
94192
94193
94194
94195
With reed
pulser RH1
94218
94219
94220
94221
94351
94354
With reed
pulser RH100
94196
94197
94198
94199
94200
94201
With inductive
pulser IH
94224
94225
94226
94227
94228
94229
Type approval as hydraulic sensors for water meters conforming to Directive 2004/22/EG - EN 1434. Optional: Declaration of type approval
